High Frequency PCB Made on Rogers RT/duroid 5880 | Rogers 5880 RF PCB

High Frequency PCB Made on Rogers RT/duroid 6002 | RT6002 RF PCB

Hi,

Good day!

Thanks for your time to check this message. It may be helpful to your RF devices.

 

Rogers 6002 was the first low loss and low dielectric constant PCB material to offer superior electrical and mechanical properties essential in designing complex microwave structures which are mechanically reliable and electrically stable. With dielectric constant value of 2.94 and dissipation factor 0.0012, it's widely used in Phased Array Antennas, Ground Based and Airborne Radar Systems, Global Positioning System Antennas and Commercial Airline Collision Avoidance etc.

 

Our PCB Capability (RT/duroid 6002)

PCB Material:	Ceramic-filled PTFE composite
Designation:	RT/duroid 6002
Dielectric constant:	2.94  ±0.04 (process)
	2.94 (design)
Layer count:	Dual Layer, Multilayer
Copper weight:	0.5oz (17 µm), 1oz (35µm), 2oz (70µm)
Laminate thickness:	10mil (0.254mm), 20mil (0.508mm)
	30mil (0.762mm), 60mil (1.524mm), 120mil (3.048mm)
PCB size:	≤400mm X 500mm
Solder mask:	Green, Black, Blue, Yellow, Red etc.
Surface finish:	Bare copper, HASL, ENIG, Immersion silver, Immersion tin, OSP etc..

 

It's available for prototype PCBs, small batches and large volume production. If you are interested in RT/duroid 6002 high frequency PCB, we are willing to share our price with you.

 

Warm Regards

Ivy Deng | Business development

Bicheng PCB | website: www.rfpcb-board.com | Material partners: Rogers, Taconic, ITEQ, SHENGYI, KB, TAIYO, KUANGSHUN

 

If you do not want to receive emails from Bicheng about marketing communications and special offers, reply as "remove" in the subject line.